industrial burner manufacturer
1. The function of hot water industrial burner manufacturer in hospital
When hot water leaves the boilers, the supply pump units drive it through the heat exchangers, transmitting heat to the air and to the sanitary water. The water then returns to the boiler by means of return pump units.
In recent years, the state environmental protection is all the more attention we as a company with the times, in order to respond positively to the implementation of the national environmental protection requirements from coal to gas project. But the choice of industrial burner manufacturer suppliers in this area quite a headache, after repeated comparison and investigation, we chose to partner with fast boiler. Fang did not disappoint quickly proved that the recommended boiler operation after use to fully meet our needs, both energy saving and environmental protection, high thermal efficiency, to a certain extent, cost savings for our fuel. --customer feedback
The presence of scale, corrosion and other problems of industrial industrial burner manufacturer water quality testing pH of treatment water quality detection problem of industrial boiler water testing approach the problem of treatment of industrial boiler water quality detection problem of industrial boiler 1, controls the boiler water. Therefore, in the process, we should focus on different issues, to take a different approach for processing, in order to achieve tangible results. When handling scale problems, a processing method used comprises the following: First, before referring to water to enhance the detection of the water, and analyzing the characteristics thereof, to achieve further based on knowledge of the water, effective control. Second, combined with the detection parameters, the development of industrial boiler optimization program running to do to solve the problem of scale from the source. In dealing with boiler corrosion problems, with particular emphasis on strengthening the dosing process. For example, in an empty pot, when dosing, which calculates a reference shall be subject to a total volume of boiler water. In the boiler, the pharmaceutical formulations should be combined with the results of water quality tests conducted increase or decrease. In short, strengthen the control of the pH of the boiler water is very necessary. In general, it should be controlled 10.0-12.0.2, material hardness control industrial boiler raw water during use, also by strengthening treatment raw water hardness was controlled to control them. Raw material for the effective control of water hardness, can take the following approach: first, to monitor water quality in the boiler water, boiler and of the inspection results, select the appropriate treatment processes. Second, using sodium ion exchange treatment process or the like, and subjected to regular monitoring in order to control the hardness of the material of the raw water. Third, the raw water softening treatment, in order to achieve the desired effect. Fourth, the quality of the boiler water and steam in combination, to reduce the alkalinity of the raw water. In short, it is very necessary for prevention from a variety of ways.
Boiler quality requirements 1, industrial burner manufacturer welding work must be held boiler pressure vessel welder examination certificate of welder operation. 2, welding dimensions conform to the requirements of design drawings and process documents, weld height is not lower than base metal, smooth transition with base metal. 3, boiler weld and heat affected zone no cracks, pores, arc pits and slag. 4, pipe hole weld bite depth not more than 0.5 mm, total length (sum of both sides) not more than 1 / 4 of tube perimeter, and not more than 40 mm. 5. The boiler construction strictly complies with the welding operation rules and other standards and relevant regulations, and makes a good record of construction welding. Record for the record