Heating plant 2 tons of gas heating and hot water boiler residential district heating plant is very different from that room high, normal cells in the heating room is generally about 3 meters high, and the factory premises heating area is generally about 6 meters, so this As a result originally applied to district heating boiler plant but does not apply to heating. In general, one ton gas hot water boiler to meet the 10,000 square meters of heating, as the heating plant, engineers need to be determined by the position of plant height and plant are located. Provide some small series several types of gas boilers for reference: WNS1.4-1.0 / 90/70-Q, WNS1.4-1.0 / 115/90-Q are provided both the boiler pressure of 1.0Mpa, design of boiler efficiency was 95%, the exhaust gas temperature is lower than 80 ℃, condensed recovery can be installed according to the needs of users. Both gas boiler characteristics: 1, 2 fully automated operation, condensate recovery unit 3 boiler thermal efficiency, easy installation, fast and do not take up space

Hazard scale industrial 10 ton low nox 30mg condensing steam boiler steam boiler scale produced when using what harm it? Xiao Bian told you about hazards under the steam boiler scale today, hope can help to you. 1, waste of fuel, because the thermal conductivity decrease the thermal efficiency of the steam boiler scale ten times larger than the thermal conductivity of steel to the fractional number of times. Thus when the steam boiler scale junction, heat transfer performance of the steam boiler heating surface is deteriorated, fuel combustion heat is not released efficiently transferred to the boiler water, a large amount of heat is taken away by the flue gas, resulting in increased exhaust gas temperature, increase heat loss, reduce the thermal efficiency of the furnace. In this case, in order to ensure the parameters of steam boilers, adding more fuel would have to increase the temperature of the furnace and flue gas temperature, thus resulting in wasted fuel. It was estimated that the furnace has a heating surface junction 1mm thick scale, waste of fuel from about 3% to 5%. 2, the impact the safe operation of the steam boiler scale often generate high heat load heating surface. Scale due to the poor thermal conductivity, leading to greatly increased local temperature of the metal wall. When the temperature exceeds the allowable metal temperature can withstand, the metal creep due to overheating, decrease in strength, the working pressure in the boiler, a metal bulge will occur, and cracking of perforation, affect the safe operation. 3, the decrease of the steam boiler output scaling boiler, heat deterioration due to evaporation or to the rated nominal heat production, it is necessary to consume fuel. However, with the increase in scale thickness, and the area of ​​the grate furnace volume is constant, the fuel consumption is limited, the output of the furnace will be reduced. 4, fouling will reduce the life of the scale steam boiler heating surface shall be completely removed in order to ensure its safe operation. Whether manual, mechanical, or the use of cleaning chemicals will affect its service life. These are the steam boiler scale harm, in order to prevent the generation of scale, we can reduce the water flow rate, regular cleaning and other measures to reduce the harm of scale.

3, used as backup.

Therefore, many boilers are many large projects using heating configuration, whenever, can guarantee the normal heating.

Recently, Nanchang, Jiangxi Province to fully implement the national environmental protection work conference and the province's environmental protection work conference, combined with the actual situation of the city, issued a "blue sky Nanchang win the Battle of three-year action plan (2018-2020 years)" (referred to as " plan"). "Plan" put forward a management plan for major air pollution problems.

As the relevant departments to actively promote the utilization of clean energy. The city gradually reduce the proportion of coal consumption, by 2020, coal accounted for the proportion of energy consumption dropped to below 65%; principles and has gradually increased the proportion of natural gas energy consumption, adhere to "the electric power should", "should air the gas" to promote natural gas work to build the pipeline, steadily "coal to gas" project.

2018, the main city of Nanchang to the new area, the main city area and open small blue through the open area to expand the range of city ban on burning areas. By the end of 2020, Nanchang County, Jinxian, Anyi required scoping combustion zone ban within the jurisdiction of, and informed consent of the uniform implementation of the municipal government.

"Plan" put forward in 2018, the main city of the new areas into the combustion zone ban, the main city through the open area and a small blue through the open area phasing out the 10 steam tons / hour and coal-fired boilers; 35 tons of steam launch built-up area / out of hours and coal-fired boilers. As of 2020, the city built basically out of the region 10 steam tons / hour and coal-fired boilers, coal-fired boilers within 10-35 tons of steam / hour range is substantially complete alternative clean energy sources, and no longer approve new 10-35 steam tons / hour of coal-fired boilers.